Pest control in Ocean Shores

Ocean Shores is mostly detached family houses with gardens, so the pest work here centres on termites: yearly inspections, looking after an existing barrier when you landscape, and checking under the house after heavy rain in the low-lying streets. Spiders and ticks in yards come a close second. Enquire through this site and the job goes to an independent pest business covering the area, which can get in touch to price it and carries it out only if you agree.

What are the homes like in Ocean Shores?

Ocean Shores, postcode 2483, is one of the coastal urban areas of Byron Shire, next to New Brighton and South Golden Beach. For that combined small area, the 2021 Census figures published by .id show 2,688 separate houses, 84.0% of dwellings, and 461 medium density homes, 14.4% (.id, Ocean Shores, New Brighton and South Golden Beach dwellings).

A house with a garden usually means lawn, beds and fences, and sometimes a deck or pergola. Those features are where termite protection can be broken by accident, because new garden beds, paving, retaining walls and soil top-ups can bridge or cover a treated zone.

Why do low-lying streets need a closer look after rain?

The NSW SES says the Billinudgel floodplain extends through Ocean Shores, and that localised heavy rain can cause flash flooding in a few low-lying streets, including Balemo Drive, Rajah Road and the Water Lily Park area, with water also backing up around the golf course (NSW SES, Byron local information).

If your home is in one of those spots, or water pools around your house after a storm, a subfloor that stays wet gives termites and wood decay an easier time. Things to check once the water drains away:

• subfloor soil that stays muddy or smells musty
• stained or swollen bearers, joists and skirting boards
• downpipes that empty against the footings
• silt or mulch washed up over the slab edge or weep holes
• garden edging that now holds water against the wall

A routine visit picks up these conditions early. The termite inspections page sets out what the inspector covers and what the report should include.

How do you keep a termite barrier working when you landscape?

Plenty of Ocean Shores owners renovate gardens, add decks or lay paths around the house. If a chemical soil barrier is in place, digging through it or covering it with new soil can open a path for termites. Byron Shire Council’s sample termite notice warns that disturbing or covering treated soil may allow termites through. If there is a baiting system, stations can be lost under new turf or paving.

Garden project	Risk to termite protection	What to do first
New garden bed against the house	Soil and mulch bridge the treated zone and hide the slab edge	Keep beds clear of the wall and keep the slab edge visible
Paving or a path along the wall	Can cover a chemical barrier or bait stations	Ask the provider whether the barrier needs topping up after
New timber deck or pergola	New timber in contact with soil near the house	Ask for an inspection before and after the build
Retaining wall or fence on the boundary of the house	Timber sleepers in soil close to footings	Use treated or non-timber materials and leave inspection access
Turf replacement	Stations hidden or damaged	Mark station locations before work starts

The termite barriers page explains the different systems and how long each is meant to last. Check your meter box or kitchen cupboard for a durable notice that records what was installed.

What will a careful inspector check here?

On a typical Ocean Shores house, expect the inspector to walk the full perimeter, check the subfloor or slab edge, look in the roof void, and inspect wet areas, decks, pergolas, fences and garden edges. They will note conditions that help termites, such as poor drainage, leaking taps or timber touching soil. A careful inspector records every area they could not get into and will not tell you a house is clear if the subfloor was too wet or too tight to enter. Anyone applying pesticides afterwards needs an EPA licence; the about page shows how to check.

Long grass and shaded garden edges can bring paralysis ticks onto dogs and children; the tick and flea treatment page covers the options.

Step by step: before a landscaping project

1. Find your durable termite notice and note the system and installation date.
2. Book an inspection before the work starts and tell the inspector what is planned.
3. Give your landscaper the barrier and station details.
4. Keep new soil and mulch clear of the wall and slab edge.
5. Have the protection checked and topped up or reinstalled where the work disturbed it.
6. Put the next yearly inspection in the calendar.

What does it cost?

Going by hipages figures for 2026, a yearly look over the house without thermal imaging falls in the range of $200 to $300 per inspection, and installing an in-ground bait system falls in the range of $2,500 to $3,500 per home. Those figures are national, not Ocean Shores quotes, and a baiting system also carries ongoing monitoring costs. A single-storey house on a flat block with a clear perimeter is simpler than a split-level home with decks over a slope. For a figure on your own place, ask for an Ocean Shores termite inspection quote.

Nearby

South along the coast, Brunswick Heads has more holiday lets and cabins.

Next step

For Ocean Shores, tell us your street, whether the house is on a slab or raised floor, whether water pools around it after storms, and what termite protection is recorded in your meter box. If you plan landscaping, a deck or paving, describe it and give the start date. Add photos of any mud tubes or damaged timber. Then ask about an Ocean Shores termite check.

Send a job enquiry